Bear Archery Compound Bow 2014 - Manual (Page 5)

2
IMPORTANT PRESS INFORMATION
Due to the design of your Bear Archery bow limbs, it is of
the utmost importance that your bow ONLY BE PRESSED
IN PROPER BOW PRESSES. Traditional style presses that use
rollers to apply pressure only to the mid section of the limbs
CANNOT BE USED. Only presses that are capable of applying
pressure to the last 2” of the limbs should be utilized, as
illustrated below
NOTE
Limb bolts MUST be backed out 3 complete turns prior
to pressing a bow equipped with flare quad limbs and 4
complete turns for bows equipped with max pre-load quad
limbs.
DO NOT USE THIS STYLE BOW PRESS
APPROVED BOW PRESSES
For the most up to date and accurate list, please visit your
local Bear Archery dealer or www.BearArcheryProducts.com
WARNING
Failure to adhere to this list of presses can result in
immediate failure of the limbs, possible injury and void the
manufacturer’s warranty.