Cam adjustments – Bear Archery Compound Bow 2013 User Manual
Page 15

15
CAM ADJUSTMENTS
Adjusting Draw Length – H13
Synchronized
Hybrid Cam System
Bow model:
• Motive 6
• Motive 7
• Method
Module #
Motive 6
Motive 7
Method
5.5
25 1/2
26 1/2
26 1/2
6
26
27
27
6.5
26 1/2
27 1/2
27 1/2
7
27
28
28
7.5
27 1/2
28 1/2
28 1/2
8
28
29
29
8.5
28 1/2
29 1/2
29 1/2
9
29
30
30
9.5
29 1/2
30 1/2
30 1/2
10
30
31
31
The H13 Synchronized Hybrid cam has a rotating
module for draw length adjustment. All draw length
adjustments can be made without the use of a bow
press. Draw length changes are made by simply
rotating the modules to the desired position and
moving the draw stop. To change draw length, remove
the socket head cap screws from the top and bottom
modules, rotate the modules to the desired
positions(line up the indicator mark on the cam with
the correct draw length indicator mark on the module),
making sure to align the top and bottom to the same
setting, and reapply the screws. Next, remove the
draw stop on both the top and bottom cam and
remount it in the corresponding stop locations to the
draw length you selected. Such module draw length
adjustments will not affect peak draw weight or timing.
Modules are right and left hand specific and top
and bottom specific.
USE ONLY RH MODULES
ON RIGHT HAND CAMS AND LH MODULES ON
LH CAMS, AND ONLY USE TOP MODULES ON
TOP CAMS AND BOTTOM MODULES ON
BOTTOM CAMS!