Specifications, Loading, Unbalanced loading – Autoquip ABS AIR BAG LIFT User Manual
Page 10
Model Travel Capacity
(pounds)
Lowered
Height
Load
End
(pounds)
Load
Side
(pounds)
Standard
Plat. Size
Maximum
Plat. Size
5ABS20
5”
2,000
6 ½”
2,000
2,000
24” x 48”
48” x 96”
5ABS 40
5”
4,000
6 ½”
4,000
4,000
24” x 48”
48” x 84”
5ABS60
5”
6,000
6 ½”
4,000
4,000
24” x 48”
48” x 72”
7ABS20
7”
2,000
6 ½”
2,000
2,000
24” x 48”
48” x 96”
7ABS45
7”
4,500
6 ½”
4,000
4,000
24” x 48”
48” x 84”
7ABS60
7”
6,000
7 ½”
4,000
4,000
24” x 48”
48” x 72”
10ABS20
10”
2,000
7 ½”
2,000
2,000
24” x 48”
48” x 96”
10ABS40
10”
4,000
7 ½”
4,000
4,000
24” x 48”
48” x 84”
10ABS45
10”
4,000
12 ½”
4,000
4,000
24” x 48”
48” x 84”
11ABS40
11”
4,000
7 ½”
3,000
3,000
24” x 48”
48” x 72”
12ABS20
12”
2,000
12 ½”
2,000
2,000
24” x 48”
48” x 96”
12ABS30
12”
3,000
12 ½”
3,000
3,000
24” x 48”
48” x 84”
12ABS45
12”
4,500
12 ½”
4,000
4,000
24” x 48”
48” x 84”
15ABS20
15”
2,000
12 ½”
2,000
2,000
24” x 48”
48” x 96”
15ABS30
15”
3,000
12 ½”
3,000
3,000
24” x 48”
48” x 84”
SPECIFICATIONS
LOADING
The scissors lifts have the load capacity rating stamped on a metal plate attached on
one side of the lift. This figure is a net capacity rating for a lift furnished with the
standard platform. In the event that gravity-roll sections, special tops, etc., are installed
on the lift after leaving the plant, deduct the weight of these from the load rating to
obtain the net capacity. Damage may result if the lifts are overloaded beyond the
established capacity
UNBALANCED LOADING
The stabilization provided is basically for balanced loads. Due to the fact that the lift is
designed to operate without having to be lagged to the floor, special attachments that
extend beyond the length and/or width dimensions of the platform should be avoided.
This will prevent unintentional tipping of the lift that could lead to damage of the
equipment or personal injury.
10