APG PT-503 Slave Submersible datasheet - Manual (Page 2)

PT-503 Specifications
Performance
• Accuracy (linearity, hysteresis, & repeatability):
up to 0.10% of span (B.F.S.L.)
• 1 Year Stability: ≤ 0.75% of span
• Temp Compensation Range:
-32 º to 122ºF (-35º to 50ºC)
• Operating Temperature:
-20 ºF to 130º - PVC Cable
-30 ºF to 130º - Ceramic Sensor
0 ºF to 130º - 316 SS coated with Teflon
• Temp Effects on Zero & Span:
≤ 0.025% FS/ ºF @ 70º
• Frequency Response:
Less than 5mS
Connectivity
• Output:
4-20 mA 0-5V mV/V
Modbus/RTU (RS-485)- with temp. output
Electrical
• Supply Voltage: 10-28 VDC
• Electrical Connection:
- Vented watertight cable w/free ends
- Non-vented cable
Up to 200 lbs tensile strength
• Electrical Protection:
Lightning and Surge protection is built in.
Protected against reverse polarity, surge
per IEC 61000-4-5
Environmental
• Maximum Depth:
Submersible up to 346 ft. (150 psig)
Physical
• Housing: PVC
• Cable:
Urethane PVC Hytrel
• Protective Cone: PVC
• Seals: PTFE and Viton
• Specific Gravity: 1.95
Automation Products Group, Inc. www.apgsensors.com
tel. 888.525.7300 [email protected]
2
0.5”
12.7 mm
6.5”
165.1 mm
1.3”
33.02 mm
*Shown with
removable nose cone.
*Shown with flush mount.
5.5”
139.7 mm
7.75”
196.85 mm
6.75”
171.45 mm
1.3”
33.02 mm