APG PG7 datasheet - Manual (Page 2)

PG7 Specifications
Performance
• Accuracy (linearity & hysteresis): ±0.25% of full
scale (BFSL)
±0.1% accuracy in selected ranges
• Stability – One Year Zero Drift: <±1% FS
• Thermal Zero Shift: ±0.02% FS/ ºF
• Thermal Sensitivity Shift: ±0.02% FS/ ºF
• Life: 10 million cycles minimum
• Adjustments: Auto zero, tare
• Overpressure: 2X full scale
Connectivity
• Output Options:
4-20 mA, 0-2 VDC, 0-5 VDC, Solid State Relay,
RS-485
Environmental
• Protection rating: IP67
• Compensated Temp: 20º - 130ºF (-7º - 54ºC)
• Storage Temp: -40º - 160ºF (-40º - 71ºC)
• Operating Temp: 0º - 160ºF (-18º - 71ºC)
Certification
• NIST certification on select ranges
• CE
Programming
• Programmable Features:
User selectable units of measure, Max/Min Reset
& Reading, Peak-Hold, Tare, Sample Rate, Range
Adjustment, Quick Calibration, Adjustable
Resolution, Auto-Off
Electrical
• Battery Option:
(2) AA alkaline (typical life 2,000 hrs)
Auto-off: 2-32 minutes
Low battery detection with 25% increments
• External Power Option: 9-28 VDC
• 6-Pin Connector: R04-R6M
Physical
• Size: 3.25” x 1.6” (82.6 x 40.6 mm)
Connection: 1.47” (37.3 mm)
• Weight: 0.36 lb (163 grams)
• Injected molded case (EMI-X ® PDX-W-88341)
• Wetted materials: 316L SS: up to 10,000 psi
• Protection rating: IP67
• Display: 5 digit LCD, 0.4 in. digits
Automation Products Group, Inc. www.apgsensors.com
tel. 888.525.7300 [email protected]
2
3.25”
82.6 mm
3/4 Hex
1/4” NPT
1.47”
37.3 mm
1.60”
40.6 mm
Rear Port
6-Pin
Connector