Anchor MESH POOL COVER GROUND TUBES AND STAKES - Manual (Page 2)

1. Remove Brass Anchor screw from Brass Anchor.
2. Place Brass Anchor into Counterbored end of Ground Tube.
3. Stand Ground Tube up on Firm Surface.
4. Using a hammer, drive Anchor Setting Tool on Brass Anchor
into Ground tube
1. Insert the Anchor Setting Tool down into the Brass Anchor
with Screw removed.
2. Pound Ground Tube down into ground until top of Ground
Tube and Brass Anchor are fl ush with ground surface.
Anchor Setting Tool
Firm Surface
Counterbored end of
Ground Tube
Brass Anchor with Screw
removed.
DIRECTIONS FOR DRIVING BRASS ANCHOR INTO GROUND TUBE
DIRECTIONS FOR DRIVING BRASS GROUND TUBE INTO GROUND
Anchor Setting Tool
Hammer or sledge
Ground Tube
1100 Burch Drive
Evansville, IN 47733
812.867.2421