Allen&Heath Xone 32 - Manual (Page 17)

XONE:32 User Guide 17
Using the DRS™ User Presets
The Digital Recall System is a powerful performance function pioneered by Allen & Heath. It uses on-board
memories to store and recall the filter settings. You can store four different combinations of the VCF switch
settings in the four user programmable memories. Once stored they can be instantly recalled by pressing the
preset button. The presets become performance controls letting you make dramatic changes to the
configuration of the filter instantly and very easily.
When you power up the console none of the presets is selected and all their LED indicators are off. The
console always powers up with its default settings. The user presets are retained when power is removed.
Pressing one of the preset buttons after power up recalls the settings last stored in that memory. A power up
hard reset facility is available to clear the memories back to the default settings.
Settings which are Stored
• Channel FILTER select switches
• Filter TYPE switches HPF, BPF, LPF
• LFO ON switch
• LFO
x2 switch
Settings which are Not Stored
• RESONANCE
control
•
VCF slider FREQUENCY
• VCF slider LFO DEPTH
•
LFO speed (tempo)
How to Store a Preset
Press and hold the preset button for 2 seconds until its red indicator flashes once to confirm the current settings
have been stored. When you release the button that preset remains selected.
How to Recall a Preset
Press the preset button for less than 1 second. Its red indicator lights to indicate the console settings have been
overwritten with the contents of the memory.
How to Clear all Presets to Default
Hold down the LFO ON and x2 switches for 2 seconds while switching the console on. This clears the presets
back to the factory default. Note that you do not normally need to do this as you can clear individual presets by
setting the switches as per default and then storing each individually. Remember to turn the amplifiers off while
you switch the console on or off.