AirLive OD-600HD - Manual (Page 36)

5. Administrating the Device
AirLive OD-600HD User’s Manual 32
Running:
Enable or disable this camera tour.
Preset:
Set the sequence of the tour. Maximum 16 points can be assigned. The selected preset
position is added in the Sequence list from 1 to 16.
Wait Time:
Type a period of time during which the camera is to stay at each preset point, between 0 to
36000 seconds.
To use the camera tour function, user must preset some camera positions first.
5.1.3 System : Configure and maintain system
Use this menu to perform the principal settings of the device.
System
Device Title:
You can enter the name of this unit here. It’s very useful to identify the specific device from
multiple units. The information will be shown on IPWizard II once the device is found.