AiM Kit for SoloDL on Yamaha R1-R6 2004-2013 - Manual (Page 22)

21
The software shows SoloDL configuration page: press “Configuration manager” and select the
configuration you want to use or press “New” to create a new one. In this second case “New
configuration” panel shows up: select ECU Manufacturer “YAMAHA” and select an ECU model among
these available ones according to the production year of your bike. Here they are listed with the
different production years:
• BIKE_R1_04_05_06
for Yamaha R1 from 2004 to 2006 included
• BIKE_R1_07-08 for
Yamaha R1 from 2007 to 2008 included
• BIKE_R1_09_11
for Yamaha R1 from 2009 to 2013 included
• BIKE_R6_04_05
for Yamaha R6 from 2004 to 2005 included
• BIKE_R6_06_10 for Yamaha R6 from 2006 to 2013 included
Confirm pressing “OK” in both panels and transmit the configuration to SoloDL pressing “Transmit” as
shown below.