AiM Microtec M222 for SoloDL - Manual (Page 7)

6
4
Microtec “M222” protocol
Channels received by SoloDL connected to Microtec M222 protocol are:
ID CHANNEL NAME FUNCTION
ECU_1 MT_RPM RPM
ECU_2 MT_ENG_ACC Engine acceleration
ECU_3 MT_TPS Throttle position
ECU_4 MT_DEV_TPS Throttle position derivative
ECU_5 MT_ECT Engine coolant temperature
ECU_6 MT_TAIR Intake air temperature
ECU_7 MT_BARO Barometric pressure
ECU_8 MT_MAP Manifold air pressure
ECU_9 MT_BATT Battery supply
ECU_10 MT_GEAR Engaged gear
ECU_11 MT_LAMBDA Lambda value
ECU_12 MT_MAP_INDEX Manifold air pressure index
ECU_13 MT_INJ_PHASE Injection phase
ECU_14 MT_INJ_TIME Injection time
ECU_15 MT_INJ_BASE injection base time
ECU_16 MT_ING_ADV Ignition advance
ECU_17 MT_ING_BASE ignition base angle
ECU_18 MT_COR_INJ_H2O Injection correction from water temperature
ECU_19 MT_COR_INJ_AIR Injection correction from air temperature
ECU_20 MT_COR_INJ_MAP Injection correction from manifold air pressure
ECU_21 MT_COR_INJ_AUX Injection auxiliary correction
ECU_22 MT_COR_INJ_ENG Injection correction from engine temperature
ECU_23 MT_OFF_IGN_H2O Offset ignition from water temperature
ECU_24 MT_OFF_IGN_AIR Offset ignition from air temperature
ECU_25 MT_OFF_ING_MAP Offset ignition from manifold air pressure
ECU_26 MT_OFF_ING_AUX Auxiliary ignition offset
ECU_27 MT_OFF_IGN_ENG Offset ignition from engine temperature
ECU_28 MT_DWELL Dwell time