AiM Microtec M206 for SoloDL - Manual (Page 2)

1
This user guide explains how to connect Microtec M206 ECU to AiM SoloDL. It is an aftermarket ECU
installed on Kawasaki and Suzuki bikes only. Please refer to Microtec website “www.microtec.cc” to
know supported bike models.
1
Installation notes
To install SoloDL on your bike you can use a bar pad. AiM provides the two optional bar pads shown
below:
• bar pad for handle bar with cross brace – part number: DNKTKPMSOL1 (image on the left);
• bar pad for handle bar without cross brace – part number: DNKTKPMSOL0 (image on the
right).