AIM Sports Green Lasers - Manual (Page 2)

LG002
Tactical Green Laser
w/External Adjustments
LG001 INSTRUCTIONS
INSTALLING BATTERY
1. Unscrew collar on back of laser and insert one CR123A battery, positive side facing
up, and replace collar.
CHANGING/INSTALLING SWITCH
1. Unscrew collar and press down on switch to remove.
2. Place desired switch in larger end of collar until seated. Replace collar on laser.
3. Press switch to test the laser. (Do not look into laser while testing)
ADJUSTING LASER BEAM
1. Loosen the four set screws (do not remove screws) and then remove lens cap.
2. Loosen the screw that is away from the direction you want to move the laser beam
and tighten the adjusting screw in the direction you want to move the laser.
3. Continue this process until the laser is in the desired position and then finger
tighten both screws. (Over tightening can strip the adjusting screws). The third
adjustment screw controls the up and down movement of the laser beam.
4. Replace lens cap and finger tighten, then tighten the set screws.
MOUNTING LASER
1. Loosen all three screws on mount until laser will slide in. Place mount with laser on
desired mounting platform and evenly tighten all three screws.
LG002 INSTRUCTIONS
INSTALLING BATTERY
1. Unscrew collar on back of laser and insert one CR123A battery, positive side facing
up, and replace collar.
CHANGING/INSTALLING SWITCH
1. Unscrew collar and press down on switch to remove.
2. Place desired switch in larger end of collar until seated. Replace collar on laser.
3. Press switch to test the laser. (Do not look into laser while testing)
ADJUSTING LASER BEAM
1. Remove windage and elevation protective caps from adjustment turrets.
2. Using a flat head screwdriver turn adjustment turret counter clockwise to move laser
beam away from you. Turn clockwise to move laser beam towards you.
3. Continue this process until the laser is in the desired position.
4. Replace protective caps on adjustment turrets.
MOUNTING LASER
1. Loosen all three screws on mount until laser will slide in. Place mount with laser on
desired mounting platform and evenly tighten all three screws.
GREEN LASERS FEATURES
“This Laser Product is designated as Class 3R during all procedures of operation”.
“Laser Light-Avoid Direct Eye Exposure”.
• Made of anodized aircraft grade aluminum
• Green <5mW laser
• Windage and elevation adjustment
• Weaver style mount
• Includes momentary on/off end cap and wire pressure switch
• Excellent for quick target acquisition
SPECIFICATIONS
WAVELENGTH 530-535nm
BATTERY CR123A
OPERATING TEMPERATURE 35-90F
RANGE 500M
AIM SPORTS INC.
1321 E. CHIEF PRIVADO
ONTARIO, CA 91761
PROD #: XXXXX
LOT #: AIM13-XXXXX
LASER LIGHT
AVOID DIRECT EYE EXPOSURE
CLASS 3R LASER PRODUCT
530-535nm <5mW CW
EN/IEC 60825-1 2007
COMPLIES WITH FDA
PERFORMANCE
STANDARDS FOR
LASER PRODUCTS
EXCEPT FOR
DEVIATIONS
PURSUANT TO LASER
NOTICE NO. 50, DATED
JUNE 24, 2007 CAUTION
Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous
radiation exposure.
LG001
Pistol/Rifle
Green Laser