AIM Sports Scopes User Manual

Page 9

COMPLETING THE INSTALLATION

1. Without disturbing the optimal eye relief position, rotate the
scope until the elevation adjustment dial is at the top of the
scope.

2. From a firing position, check to be sure that the vertical hair of
the reticle aligns with the vertical axis of the firearm.
Misalignment will not affect accuracy at moderate distances
but it can diminish long range accuracy.

3. When you are satisfied, tighten the ring screws evenly and
securely.

FOCUSING THE RETICLE

Secure the scope and firearm in a firm rest. Safely point the
scope at a light colored background object. With the scope ap-
proximately four inches from your eye the reticle should appear
sharp and crisp; if it does not, it is necessary to adjust the focus
by means of the eyepiece.

This can be done in two ways:

a. Grasp the edges of the battery between the thumb and
forefinger and lift it free of the dial.

b. Turn the scope so that the illumination dial faces downward
and gently tap the eyepiece against the edge of your palm.

3. Insert the new battery, positive (+) side up.
4. Replace the battery cover on the illumination dial and turn it
clockwise until it is secure while holding the sides of the
illumination dial to keep the entire dial from turning.

Replacement 3-volt lithium batteries:

Duracell…………Dl1/3N
Eveready………..2L76
Kodak…………...K58L
Varta……………CR1/3N
Sanyo…………...CR1/3N

There may be other lithium batteries that are acceptable with
your AIM Illuminated Reticle scope. Check with your local
retailer for other options.