7 drives, 2 external drives, Rives – ADS-TEC VMT5012 (2010) User Manual

Page 31

Terminals VMT5012

RIVES

7.1 H

ARD DRIVES

COMPACT FLASH DRIVES

(IDE

INTERFACE

)

The storage medium is selected according to the customer requirements. The following

options are available for storage:

Compact Flash memory:

Compact flash memories with a storage capacity of at least 64 MB are

used. The capacity depends on the desired operating system and the

additional programmes to be installed.

Hard disk:

A 2.5" hard disk with at least 20 GB (UDMA) is used. On delivery, the

hard disk is formatted in NTFS format (default for Windows XP).

Note:
Recommendation for selection of storage media with a basic installation:
Compact Flash memory: Windows CE.5.0 / Windows XP embedded
Hard disk: Windows XP Professional

7.2 E

XTERNAL DRIVES

By default, no drive for removable media (CD/floppy disk) is integrated in the device.

Additionally the system provides an USB interface, with which an external drive could be

connected. In this case, you'd have to ensure that the equipment used is suitable for use

in an industrial environment.

Warning:
Connecting or disconnecting of external drives during operation is inadmissible, since it

cannot be excluded that the drive is in use at this point in time. Data loss might occur if

not observed!

Pos: 35 /Datentechnik/Software / Treiber Installation/Installation des Betriebssystems/Installation des Bertiebssystems für/IPC 11/CPC/PLC/OTC/ VMT-Serie/OPC -Serie @ 0\mod_1159173231142_681.doc @ 926 @