Description, Important safeguards, Vacuum cleaner assembling – Scarlett SC-1082 User Manual

Page 2

DESCRIPTION

1. Carrying handle
2. Dust bag compartment
3. Air inlet
4. Built-in accessories compartment open

button

5. Dust bag full mechanical indicator
6. Built-in accessories compartment
7. Cord rewind button
8. Power control switch
9. Power light
10. On/Off button
11. Wheel

IMPORTANT SAFEGUARDS

When using this appliance, basic precautions should always be followed:
· Read this instruction manual carefully.

· Home use only. Do not use for industrial purposes.

· Before the first connecting of the appliance check that the voltage indicated on the rating

label corresponds the mains voltage in your home.

· Unplug the appliance from the power supply, when not in use and before servicing.

· To reduce the risk of electric shock, do not use outdoors or on wet surfaces.

· To avoid damage of the flexible hose, do not fold or pull it strongly.

· Do not leave the vacuum cleaner without supervision, when plugged in.

· Keep away from children.

· Never switch off the appliance by pulling the cord.

· To avoid deforming of the plastic components of the appliance or fire accident, never put

the appliance directly in sun shine or near any heater or the like.

· Do not handle the plug by wet hands.

· Do not put any object into inlets. Do not use with inlet blocked. Keep free of dust, hair and

anything that may reduce airflow.

· Be careful, when cleaning on stairs.

· Do not make attempts to repair the appliance, adjust or replace parts in the vacuum

cleaner. When malfunctions happen, contact the authorized service center for
examination, repair, electrical or mechanical adjustment.

· Do not let the cord hang over edges or touch hot surfaces.

· Before you start using the vacuum cleaner, please remove large or sharp objects from the

floor in order to prevent the damage of the filter.

CAUTION: Never use the vacuum cleaner without the filters.

VACUUM CLEANER ASSEMBLING

Always remove the plug from the power supply before fitting or removing accessories.

FITTING FLEXIBLE HOSE

· Insert the flexible hose into the air inlet and press it until it clicks into proper position.

HOSE REMOVING

· To remove the flexible hose from the vacuum cleaner, press the button situated on the

flexible hose base, then pull to remove it from the attachment point.

6 7