beautypg.com

Echo WT24 Instruction v.4 User Manual

Instructions, Warning, Safety

background image

Instruction Sheet

Instructions

PN XXXXX-XX

Rev. 050113

SUBJECT: 14" [35,6 cm] , 48 TEETH

SABRE BLADE ASSEMBLY INSTRUC-

TIONS
FITS MODELS: WT24, WT24T, WT24S

Before inspecting or servicing any part of this machine,

shut off or disconnect power source and make sure all

moving parts have come to a complete stop.

WARNING

2 mm Cutting Width — Quick, Clean Cut
Tungsten Carbide Tips — Longer Life
14" Diameter — Greater Reach
48 Teeth — Designed for a Smooth Cut
The Sabre Tooth Blade is used for cutting wood, weeds, brush and
small trees up to 4" diameter.

ДЙ~кЕ~н йкзЗм Ен ëKÅç

ã

The Sabre Tooth Blade is used for cutting wood, weeds, brush

and small trees up to 4" diameter.

SAFETY

Your safety and the safety of others is important. Valuable safety

messages are provided in these instructions. Please carefully read

and obey these messages.
1. Improper use or abuse of the Sabre Tooth Blade can result

in serious injury.

2. Do not install or operate a Sabre Tooth Blade on the Wheeled

Trimmer with any safety device or guard removed, incorrectly

installed, changed, inoperative or in poor condition.

3. Do not use bent, fractured, dulled or damaged Sabre Tooth

Blades.

4. Do not operate the Wheeled Trimmer with a Sabre Tooth Blade

installed in the vicinity of bystanders. Keep a minimum distance

of 100 feet away from people and pets.

5. Do not allow children or an inexperienced operator to use the

Wheeled Trimmer equipped with a Sabre Tooth Blade.

6. Wear safety glasses at all times during operation.
7. Inspect the surrounding area thoroughly before use. Remove

all foreign objects before operation.

8. Do not allow a rotating Sabre Tooth Blade to touch any mate-

rial other than wood, weeds, brush, and small trees up to 4"

diameter. Avoid hitting stones, wire, bottles, rocks, glass, cans,

metal of any kind and any other foreign objects.

9. Do not operate the Sabre Tooth Blade and Wheeled Trimmer

like an axe. The Sabre Tooth Blade is not intended for such

use; improper use can seriously damage both the Sabre Tooth

Blade and Wheeled Trimmer resulting in serious injury.

10. Always keep the Sabre Tooth Blade maintained in good

working condition

INSTALLATION

1. Inspect kit to verify all items were received.
2. Use 1-1/16" box end wrench on flat spots of top spindle spacer.
3. Use a second 1-1/16" box end wrench on hex of mower ball.

Loosen mow ball and replace Trimmer Disk with Sabre Tooth

Blade.

4. Replace mower ball and tighten.

OPERATION

Wear safety glasses during operation. Wear proper clothing to

protect feet, legs and other exposed body parts. The intended use

of the Sabre Tooth Blade is for cutting wood, weeds, brush and

small trees up to 4" diameter.
Keep the wheels grounded at all times to prevent undue pressure

on the trimmer head which could result in personal injury. Do not

use the Sabre Tooth Blade as an axe.
1. Inspect the surrounding area for foreign objects. Keep the Sa-

bre Tooth away from stones, wire, bottles, rocks, glass, cans,

metal of any kind and any other foreign objects.

2. Start the engine. Refer to trimmer owner's manual or engine

manufacturer owner's manual for specific starting instructions.

3. Place the trimmer head on the ground and begin walking slowly

to begin cutting.

4. Cut trees so they fall away from the trimmer and operator.
5. Refer to instructions in the Wheeled Trimmer owners manual

for using trimming adjustments and the Off Center Tilt (OCT)

feature. Be sure not to cut into the ground to prevent premature

blade dulling.

ECHO BEAR CAT

www.bearcatproducts.com

237 NW 12th Street, West Fargo, ND 58078-0849

Phone: 701.282.5520 • Toll Free: 888.645.4520 • Fax: 701.282.9522

E-mail: [email protected][email protected]

This manual is related to the following products: