Echo LS21 Instruction v.5 - Manual

Instruction Sheet
Instructions
PN 77188-00
Rev.120112
SUBJECT: CRADLE KIT # 77189-00
FITS MODELS: LS21, LS22 & LS27
INSTALLATION:
Refer to parts list on reverse.
1. Slide cradle 77187-12 into position on the beam using the slots in the mounting
flanges of the cradle.
2. Slide cradle 77214-12 into position on the beam using the slots in the mounting
flanges of the cradle.
3. Secure the cradles to the frame of the machine and to each other at the cradle
flange locations with the supplied 3/8" inch bolts, washers and nuts, and tighten
securely.
Before inspecting or servicing any part of this machine,
shut off power source, disconnect the battery cables,
and make sure all moving parts have come to a
complete stop.
WARNING
2
4
5
2
1 3
Item 4; 77187-12 Cradle
Installed on engine side of machine
Item 5; 77214-12 Cradle
Installed on operator side of machine