Cutting attachment to drive shaft installation, Ppt-280 assembly – Echo PPT-280 Serial E08612005942 - E08612999999 User Manual
Page 15
PPT-280
ASSEMBLY
X7702091009
15
© 02/2014 ECHO Inc.
5. Connect 2 ignition stop leads (C,D) from throttle cable
tubing to 2 ignition leads (C,D) on engine.
6. Gather ignition wires and position behind air filter case.
7. Install air filter and cover.
Cutting Attachment to Drive Shaft Installation
Saw Chain is sharp! Always wear gloves when handling assembly, otherwise serious personal injury
may result
1. Loosen the two (2) screws (A) and remove locator screw (B)
on cutting attachment.
2. Loosen clamp knob (E) turning counter clockwise.
C
D
A
B
F
E
This manual is related to the following products: