Read the manuals, Clear the work area, Keep a firm grip – Echo PAS-266 User Manual

Page 8: Keep a solid stance, Avoid hot surfaces, Equipment, Safety pas-266

X7502026902

SAFETY

PAS-266

Read the Manuals

• Provide all users of this equipment with the Operator’s Manual

and Safety Manual for instructions on Safe Operation.

Clear the Work Area

• Spectators and fellow workers must be warned, and children

and animals prevented from coming nearer than 15 m (50 ft.)
while the unit is in use.

Keep a Firm Grip

• Hold both handles with thumbs and fingers encircling the

grips.

Keep a Solid Stance

• Maintain footing and balance at all times. Do not stand on slippery, uneven or unstable surfaces. Do not

work in odd positions or on ladders. Do not over reach.

Avoid Hot Surfaces

• Keep exhaust area clear of flammable debris. Avoid contact

during and immediately after operation.

Equipment

Use only ECHO approved attachments. Serious injury may result from the use of a non-approved
attachment combination. ECHO, INC. will not be responsible for the failure of cutting devices,
attachments or accessories which have not been tested and approved by ECHO. Read and comply
with all safety instructions listed in this manual and safety manual.

• Check unit for loose/missing nuts, bolts, and screws. Tighten and/or replace as needed.

• Inspect guards and shields for damage and to ensure that they are securely in place. Replace if damaged

or missing.

• Check that the attachment is firmly attached and in safe operating condition.

• Check that handle and harness (if included) are adjusted for safe, comfortable operation. See Assembly

Section for proper adjustment.

Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing and loose objects
away from all openings.

◆

ALWAYS stop engine, disconnect spark plug, and make sure all moving parts have come to a complete
stop before removing obstructions, clearing debris, or servicing unit.

◆

DO NOT start or operate unit unless all guards and protective covers are properly assembled to unit.

◆

NEVER reach into any opening while the engine is running. Moving parts may not be visible through
openings.