Echo PE-260 Serial 03001001 - 03999999 - Manual (Page 10)

10
D
ESCRIPTION
The ECHO product you purchased has been factory pre-assembled for your convenience. Due to packaging restrictions,
shield installation and other assembly may be necessary.
After opening the carton, check for damage. Immediately notify your retailer or ECHO Dealer of damaged or missing
parts. Use the contents list to check for missing parts.
CONTENTS
__ 1, Edger Assembly
__ 1, Power Head
__ 1, Drive Shaft Assembly
__ 1, Plastic Bag (Co-Pack)
__ 1, Operator's Manual
__ 1, Safety Manual
__ 1, Warranty Registration Card
__ 1, ECHO Emissions and Warranty Statement
__ 1, 50:1 1 Gal. ECHO Oil Mix
__ 1, Front Handle
__ 4, 5X35 mm screws
__ 4, 5 mm nuts
__ 1, Scrench (Combination Spark Plug Socket/Screwdriver
__ 2, split pins
__ 1, 4 mm Hexagon Wrench
__ 1, Locking Tool
__ 1, 10 mm Spanner Wrench
__ Safety Glasses
IMPORTANT ENGINE INFORMATION
ENGINE FAMILY: YEHXS.0254RA
DISPLACEMENT: 25.4 CC
THIS ENGINE MEETS U.S. EPA PAHSE II EMISSION REGULATIONS
FOR S.O.R.E. REFER TO OWNER'S MANUAL FOR MAINTENANCE
SPECIFICATIONS AND ADJUSTMENTS.
EMISSION COMPLIANCE PERIOD : 300 HRS.
An Emission Control Label is located on the engine. (This is an EXAMPLE ONLY, information on label varies by engine
FAMILY).
EMISSION CONTROL
EPA Phase II
The emission control system for these engines are EM (Engine Modification).
PRODUCT EMISSION DURABILITY
The 300 hour emission durability period is the time span selected by the manufacturer certifying the engine emis-
sions output meets applicable EPA emissions regulations, provided that approved maintenance procedures are
followed as listed in the Maintenance Section of this manual.