Bissell BS-9400F - Manual (Page 3)

Prepared by Monique Lania 3 Call Servicing Guide ProHeat 2X 9400F.doc
Solution 2:
Has Tank-in-tank been emptied and refilled and has the SmartMix (solution) bottle been filled with solution?
No, empty and refill water tank and
fill SmartMix bottle (solution bottle)
with Bissell Solution, problem solved Yes
Tank-in-Tank may not be seated in machine
completely. Switch power switch OFF (O).
The Pump may have lost prime
To re-prime pump switch power switch OFF (O). Hold Trigger on handle in for 1 minute.
Ensure Tank Lid is securely hooked into grove on front lip
of Tank and lock into place by lifting grey latch located on
back of Tank over and down until it ‘clicks’ into place.
Remove Tank-in-Tank Assembly from machine.
No Yes, problem solved
Yes, problem solved
Turn machine back ON (l). Wait 1 minute, then press Spray Trigger. Does it spray now?
No, process to Solution 3