Echo CH8720iH Owners Manual v.2 - Manual (Page 8)

4 8 INCH TURNTABLE CHIPPER
SAFETY
1.9 SAFETY DECALS
KEEP HANDS AND FEET OUT OF INLET AND
DISCHARGE OPENINGS WHILE MACHINE IS
OPERATING TO AVOID SERIOUS PERSONAL
INJURY. STOP AND ALLOW MACHINE TO
COME TO A COMPLETE STOP BEFORE
CLEARING OBSTRUCTIONS.
PN 12175
5
3
PN 12173
DO NOT OPERATE THIS EQUIPMENT IN THE
VICINITY OF BYSTANDERS. DO NOT ALLOW
CHILDREN TO OPERATE THIS EQUIPMENT.
ALWAYS STAND CLEAR OF DISCHARGE AREA
WHEN OPERATING THIS MACHINE. KEEP FACE
AND BODY AWAY FROM DISCHARGE AREAS.
PN 14942-00
PN 36378-00
7
15
1 PN 12169
KEEP HANDS AND FEET OUT OF INLET AND
DISCHARGE OPENINGS WHILE MACHINE IS
OPERATING TO AVOID SERIOUS PERSONAL
INJURY. STOP AND ALLOW MACHINE TO COME
TO A COMPLETE STOP BEFORE CLEARING
OBSTRUCTIONS.
2
READ AND UNDERSTAND THIS OWNER/
OPERATORS MANUAL. BE COMPLETELY
FAMILIAR WITH THE CONTROLS AND
THE PROPER USE OF THIS EQUIPMENT.
OBTAIN AND WEAR SAFETY GLASSES
AND USE HEARING PROTECTION AT ALL
TIMES WHEN OPERATING THIS MACHINE.
BEFORE INSPECTING OR SERVICING ANY PART
OF THIS MACHINE, SHUT OFF POWER SOURCE,
DISCONNECT SPARK PLUG WIRE FROM SPARK
PLUG AND MAKE SURE ALL MOVING PARTS
HAVE COME TO A COMPLETE STOP.
PN 12172
PN 12174
DO NOT OPERATE MACHINE WITHOUT SHIELDS IN
PLACE. FAILURE TO DO SO MAY CAUSE SERIOUS
INJURY OR DEATH.
PN 12174
4
CHECK BLADE BOLTS FOR PROPER TORQUE
AFTER EVERY 8 HOURS OF OPERATION.
CHECK BLADES AND ROTATE OR RESHARPEN
DAILY OR AS REQUIRED TO KEEP BLADES
SHARP. REFER TO OWNERS MANUAL FOR
INSTRUCTIONS. FAILURE TO DO SO MAY
CAUSE POOR PERFORMANCE, DAMAGE OR
PERSONAL INJURY AND WILL VOID THE MACHINE WARRANTY.
PN 12250 6
DO NOT OPERATE CHIPPER
WITHOUT TURNTABLE BASE
LOCKED IN PLACE. FAILURE
TO DO SO MAY RESULT IN
DAMAGE TO MACHINE AND/
OR SERIOUS BODILY INJURY.
FOR TRANSPORT, RETURN CHIPPER
TO TRANSPORT POSITION, INSERT
TRANSPORT SAFETY PIN AND CLIP,
AND SET TURNTABLE BRAKE HANDLE TO LOCKED POSITION.
FAILURE TO DO SO MAY RESULT IN DAMAGE TO MACHINE AND/
OR SERIOUS BODILY INJURY.
PN 32109-00
PN 32154-00
PN 18606-00
9
10
8
18
60
6-
00
See Section 1.10 for decal locations. Familiarize yourself with all of the safety and operating decals on the machine
and the associated hazards. See the engine owner’s manual or contact the engine manufacturer for engine safety
instructions and decals. Make certain that all safety and operational decals on this machine are kept clean and in good
condition. Decals that need replacement must be applied to their original locations.
READ AND UNDERSTAND YOU OWNERS MANUAL BEFORE
OPERATING. IF OWNERS MANUAL WAS NOT INCLUDED OR
YOU HAVE ANY QUESTIONS, PLEASE CALL 800.247.7335 OR
701.282.5520 (U.S.A.)
DO NOT OPERATE THIS EQUIPMENT
IN THE VICINITY OF BYSTANDERS.
DO NOT ALLOW CHILDREN TO
OPERATE THIS EQUIPMENT. ALWAYS
STAND CLEAR OF DISCHARGE AREA
WHEN OPERATING THIS MACHINE.
KEEP FACE AND BODY AWAY FROM
DISCHARGE AREAS. ROTATE THE
DISCHARGE TUBE OVER THE
HITCH BEFORE TOWING AND LOCK
SECURELY IN PLACE.
LOCK IN PLACE WITH LOCK
PIN BEFORE REPAIRING OR
SERVICING. FAILURE TO DO
SO MAY RESULT IN SERIOUS
PERSONAL INJURY.
P215/70R15 240 kPa, 35 psi
91 200