beautypg.com

Echo CH1236DH Instruction v.2 User Manual

Instructions, Warning

background image

Instruction Sheet

Instructions

PN 76726-00

Rev.061410

SUBJECT: BATTERY DISCONNECT
KIT # 76721-00, 76724-00, 76722-00
and 76723-00
FITS MODELS: CHIPPERS AND
CHIPPER/SHREDDERS

Before inspecting or servicing any part of this machine,

shut off power source, remove key, disconnect the

battery cables and make sure all moving parts have

come to a complete stop.

WARNING

These instructions will describe how to install the battery

disconnect switch on the models listed in the table

below.

INSTRUCTIONS

Refer to the images on the following pages to know

1.

the approximate placement for the battery disconnect

switch. Be sure the cables from the battery disconnect

switch can reach the engine battery.
Using the template provided on page seven to mark

2.

the drill hole locations and then drill a 3/4" hole and a

1/4" hole 0.81" apart.
Remove the screw and handle in the center of the

3.

switch assembly. Remove the nut and washer off the

switch. (Figure 2)
After the holes are drilled insert the switch assembly

4.

and reinstall the washer and nut.

KIT # 76721-00

KIT # 76724-00

KIT # 76722-00

KIT # 76723-00

CH4614

CH8670H

CH6670H

CH611DH

CH123DH

SC5614

CH8993H

CH6993H

CH1236DH

SC5670B

CH911DH

CH1238DH

CH6614

CH922DH

CH6614H

DL12670

CH6730H

DL12725

All kits use the same disconnect switch and decal.

NOTE

Insert the screw and handle.

5.

Install the positive (+) battery cable from the engine to

6.

one of the terminals on the back of the shut off switch,

it does not make a difference which terminal is used.
Install the supplied cable to the other terminal and

7.

then to the positive (+) battery post.

Figure 1: Switch Assembly

Figure 2: Switch