Echo CH500H Instruction v.2 - Manual

Instructions
SUBJECT: DISCHARGE PIN, KIT
# 70203-00
FITS MODELS:
SC5540B/XE,
SC5720B/XE/XF, CH500H, CH5540/XE,
CH5653/XE, CH6730H/XE/XF CH800H,
CH8540H/XE, CH8720IH/XE/XF, CH8993H/
XE/XF, CH911DH/XE, CH922DH/XE,
CH9540H/XE, CHF9540H/XE
Before inspecting or servicing any part of this machine,
shut off power source, and make sure all moving parts
have come to a complete stop.
WARNING
INSTALLATION
1. Discard the following parts (See figure 1.1):
1
2
3
4
5
6
7
8
ITEM PART NUMBER DESCRIPTION OF DISCARDED PARTS
1 15154 BOLT, 5/16 X 2-1/2 HX CAP GR5 ZP
2 15250 WASHER, 5/16 FLAT ZP
3 15356 NUT, 5/16 NE NYLOCK ZP
4 15375 PIN, 1/8 X 1 ZP COTTER
5 16556 SPRING, LOCK COMPRESSION
6 71252 LEVER, DISCHARGE LOCK
7 71253 WELDMENT, DISCHARGE LOCK PIN
8 71256 TUBE, DISCHARGE LOCK PIVOT
2. Enlarge current pin hole to fit new 3/8" pin. Will need
to drill through the top and bottom of handle.
*Note: For 5" & 6" models, may need to remove
discharge chute and drill from the bottom up,
depending on drill.
3. Bolt lanyard with existing bolt directly under handle
(See figure 1.3).
***Optional: Add additional pin hole for pin storage while
rotating the discharge chute.
Drill hole, of same diameter, 1.5" from the original pin hole
(center to center).
optional pin hole
Enlarged current
pin hole
figure 1.1
figure 1.2
PN 70201-00
Rev. 080114