beautypg.com

Maintenance and care, Skill levels, Maintenance intervals – Echo CS-271T C21112001001 - C21112999999 User Manual

Page 25

background image

23

CS-271T

MAINTENANCE AND CARE

IMPORTANT

Time intervals shown are maximum.
Actual use and your experience will determine
the frequency of required maintenance.

Your ECHO chain saw is designed to provide many
hours of trouble free service. Regular scheduled
maintenance will help your chain saw achieve that
goal. If you are unsure or are not equipped with the
necessary tools, you may want to take your unit to
an ECHO Service Dealer for maintenance. To help
you decide whether you want to DO-IT-YOURSELF
or have the ECHO Dealer do it, each maintenance
task has been graded. If the task is not listed ask
your ECHO dealer for repairs.

SKILL LEVELS

Level 1 = Easy to do. Most required tools come

with unit.

Level 2 = Moderate difficulty. Some specialized

tools may be required.

ECHO offers REPOWER™ Maintenance Kits and
Parts to make your maintenance job easier. Just
below each task heading are listed the various part
numbers required for that task. Ask your ECHO
dealer for these parts.

MAINTENANCE INTERVALS

Meintenance Procedure Letter Codes:

I = Inspect

C = Clean
R = Replace

Meintenance Procedure Notes:

(1)= Low evaporative fuel tanks DO NOT require

regular maintenance to maintain emission
integrity.

* = All recommendations to replace are based

on the finding of damage or wear during
inspection.

Component/system

Maintenance procedure

Air Filter

Inspect/Clean/Replace

1

I/C*

R*

Automatic Oiler

Inspect/Adjust

1

I

Oil Filter

Inspect/Clean/Replace

1

I

I/C*

Fuel System

Inspect/Replace

1

I (1)*

I (1)*

Fuel Filter

Inspect/Replace

1

I*

I/R*

Fuel Cap Gasket

Inspect/Replace

1

I*

R*

Guide Bar and Sprocket Nose

Inspect/Clean/Lubricate

1

I/C*

I

Saw Chain

Inspect/Sharpen/Replace/
Tensioning

2

I*

Sprocket

Inspect/Replace

2

I*

Spark Plug

Inspect/Clean/Replace

1

I/C/R*

Cooling System

Inspect/Clean

2

I/C

Muffler Spark Arrestor

Inspect/Clean/Replace

2

I/C/R*

Cylinder Exhaust Port

Inspect/Clean/Decarbon

2

I/C

Recoil Starter Rope

Inspect/Clean

1

I/C*

Screws/Nuts/Bolts

Inspect/Tighten/Replace

1

I*

Every refuel

Required

Skill level

Daily or

Before use

3 Months or

90 Hours

Yearly or

600 Hours

This manual is related to the following products: