Starting warm engine, Stopping engine, Starting warm engine stopping engine – Echo SRM-266U User Manual

Page 21: Srm-266/s operation

SRM-266/S

OPERATION

X7502026004

Starting Warm Engine

The starting procedure is the same as Cold Start except DO
NOT close the choke, and do not depress throttle trigger to wide
open position.

The attachment should not move at idle, otherwise serious
personal injury may result.

Note: If attachment moves, readjust carburetor according to

“Carburetor Adjustment” instructions in this manual or
see your ECHO Dealer.

1. Stop Switch

Move stop switch (A) away from the STOP position.

2. Purge Bulb

Pump purge bulb (C) until fuel is visible and flows freely in the
clear fuel tank return line. Pump bulb an additional 4 or 5
times.

3. Recoil Starter

Lay the unit on a flat area and keep movable attachment parts
clear of all obstacles. Firmly grip throttle handle and throttle
trigger lockout with left hand. Rapidly pull recoil starter
handle/rope (D) until engine fires.

Note: If engine does not start after 5 pulls, use Cold Start

Procedure.

Stopping Engine

1. Throttle

Release throttle and allow engine to return to idle before
shutting off engine.

2. Stop Switch

Move stop switch (A) to STOP position.

If engine does not stop when stop switch is moved to STOP
position, close choke - COLD START position - to stall
engine. Have your ECHO dealer repair stop switch before using unit again.