Assembly, Install blower pipes, Assembly pb-250ln – Echo PB-250LN User Manual

Page 12

X7501183303

ASSEMBLY

PB-250LN

ASSEMBLY

Never perform maintenance or assembly procedures with engine running or serious personal injury
may result.

Install Blower Pipes

1. Stand unit upright on blower base.

2. Align locking ribs (A) on upper blower pipe with recesses (B)

in fan case. Assure short locking rib (C) faces downward.

Slide upper blower pipe into fan case until a clicking sound

is heard.

3. Align tabs (D) with grooves (E) and slide lower blower pipe

over upper pipe until there is light resistance. Do not force

connection.

4. Hold upper pipe, and turn lower pipe clockwise, engaging

positive locking channels until connection is firm. Do not

force connection.

Note: Blower use will eventually loosen pipe connections.

Exclusive positive locking system allows pipes to be

tightened. If loosening occurs, remove lower straight

pipe, and install according to instructions 3 & 4.

Blower Pipe Upper

Blower Pipe Lower