IOGear GWRH1 - Manual (Page 3)

or
HDD
RJ45
Connector
USB Device
For Charging Only
DC 5V 1A~2.1A
For Charging Only
DC 5V 1A~2.1A
Hardware Installation
1. Plug the NetShair Link into a power source.
2. Connect an Ethernet cable from your modem to the
NetShair Link.
3. Connect a USB flash drive or external hard drive with
movies, music, photos or files.
4. Download the NetShair App for Android™ or iPod ® /
iPhone ® / iPad ® from their respective App stores (App
not required for PC/Mac).
5. Connect to the NetShair Link Wi-Fi network.
6. Follow the setup directions shown for your device type.
7. Launch your device browser to access the internet, or
launch the NetShair App to stream your media library
(PCs/Laptops simply open a browser to stream content).
2
Charging
USB Media Port: Connect to charge smartphones, mp3
players and other USB portable devices.
USB Charging Port: Connect to fast-charge tablets and
most smartphones (1A-2.1A output). For older devices
or devices that do not charge when connected to this
output, connect to the top USB port.
1 2 3