IOGear GWP512 Manual - Manual (Page 69)

2. If you want to connect to an ad hoc network only,
you can click the button of “Computer-to-computer
(ad hoc) networks only”. Click the button of
“Access point (infrastructure) networks only”,
and only the available access points in range will
be displayed in the available networks box. You can
click the button of “Any available network (access
point preferred)”, and then both access points
and wireless network adapters will be displayed in
the available networks box.
Network Operating Mode Selection
1. Click “Advanced” button from the Local Area
Connection dialog box, and you can select
network operating mode you want to use.
66
WinXP Zero Configuration Utility