IOGear GUW2015VKIT User Manual

Page 20

Video Mode Configuration

By default, your installation will be set with the

best resolution for your computer and will extend

your screen to the right. You may change the

screen mode and the operation mode.

Note: If no output is seen on the monitor

connected to the Wireless VGA Adapter, it may

be in a mode which cannot be displayed by the

monitor. This can happen if the monitor does not

have its supported modes to the Wireless VGA

Adapter. Reduce the resolution of the primary

display until an image is shown.

There are two options to adjust the Resolution,

Color Quality, Screen Rotation, and Extended

or Mirror Mode. One is to click on the IOGEAR

DisplayLink Manager icon in the Windows tray

as shown above, another is to go to Control

Panel, double click on “Display”, then choose

“Settings” tab.

Mirror Mode

Mirror mode duplicates the primary display to the
monitor connected to the Wireless VGA Adapter.

The resolution, color depth and refresh rate of the
primary screen will be replicated to the monitor
connected to the Wireless VGA Adapter. If the
monitor connected to the Wireless VGA Adapter
supports a lower resolution than the primary
display, then a part of the screen is shown on the
mirrored display. As the mouse is moved around
the screen, the Wireless VGA Adapter display will
scroll to the current area.