beautypg.com

IOGear GME225B User Manual

Page 12

background image

Installation

10

In the example below, the Bluetooth software used was Widcomm stack version 1.4.2.
1. Make sure your computer is Bluetooth-enabled and that it supports the Bluetooth HID

profile.

2. Turn ON the mouse.
3. Open your Bluetooth software (My Bluetooth Places, in our example)
4. Press and hold the Connect button located under the mouse for approximately five (5)

seconds; this will set the mouse in discovery mode.

5. Start the search for Bluetooth devices (Search for devices in range)

6. The IOGEAR Bluetooth Mini

Mouse should be listed as
shown in the image. If the
mouse is not detected, repeat
step 4 and search for your
Bluetooth mouse again.

WINDOWS SYSTEMS