IOGear GKMB01 Quick Start - Manual (Page 3)

2
Hardware Installation
STEP 1
Plug the Bluetooth Desktop Dock’s
USB cable into the computer. If it is
the first time install, please allow a
few seconds for the computer to
load the drivers.
STEP 2
Unplug the USB keyboard and
mouse from the computer, and
plug them into the Bluetooth
Desktop Dock. Perform a quick
test by typing a few words to make
sure the keyboard and mouse
work fine with the computer.
STEP 3
Install the plastic back support on the
Bluetooth Desktop Dock and place your mobile
device on the dock.
STEP 4
Now it is time to connect your Bluetooth mobile
devices to the Bluetooth Desktop Dock. If this
is the 1st time connection please see Bluetooth
pairing. To change out a previously paired
devices, you most first delete the previous
devices by pressing “
ALT + F6”. The Bluetooth
Desktop Dock allows 2 Bluetooth mobile
devices to be connected. If you wish to change
out both paired devices, press “
ALT + F7”.
STEP 2
STEP 2
STEP 3
STEP 1