IOGear GCS1924 - Manual (Page 20)

Hotkey Description
1. Press and hold [Num Lock] (Use the
[Clear] key on a Mac keyboard.)
2. Press and release [-]
3. Release [Num Lock] (Use the [Clear]
key on a Mac keyboard.)
Invoking hotkey setting mode
Invoke HSM, then press [h] To change the HSM invocation keys from [NumLock]
and [-] to [Ctrl] and [F12].
Hotkey Setting Mode (HSM) is used to set up your GCS1924 configuratino. All operations begin with
invoking Hotkey Setting Mode (HSM). When HSM is active, the Caps Lock, and Scroll Lock LEDs flash
in succession to indicate that HSM is in effect. They stop flashing and revert to normal status when you
exit HSM. Ordinary keyboard and mouse functions are suspended - only Hotkey compliant keystrokes
and mouse clicks (described in the sections that follow) can be input.
At the conclusion of some hotkey operations, you automatically exit hotkey mode. With some
operations, you must exit manuallly. To exit HSM manually, press
Esc key, or the Spacebar.
20
Hotkey Setting Mode (HSM)