BURY EasyTouch Pro - Manual (Page 21)

21
In order to avoid glare when driving at night, Sleep mode can be
activated. In sleep mode, the display will turn off after either 15, 30,
60 or 90 seconds. Press the home button to return to active mode.
When a call is incoming, the HFCK activates the display automatically.
You can select the Menu language upon commissioning, following
software updates or after loading the factory settings.
Thanks to the Multipoint function, you can connect two mobile tel-
ephones simultaneously to the BURY EasyTouch Pro via
Bluetooth. You
can operate this function with the home button. First, activate the
system Multipoint Function (Menu->Settings->Multipoint->On).
Then connect the first mobile phone with the system and disconnect
it again. The next step is connecting and disconnecting the second
phone. Now, press the telephone symbol button (call button) and
the system automatically connects both coupled phones.
The phone which is connected first gets priority, this means that
only its phone books, call lists and voice tags are uploaded and can
be retrieved from the HFCK memory. This is the same situation as if
only one mobile phone was connected to the HFCK. However, if the
secondary mobile receives a call then this call is also taken via the
HFCK. You will receive information via the voice output as to which
mobile is receiving the call (on the first or second phone).
When the BURY EasyTouch Pro is switched on, the device connects
with the mobile phone which was connected last. The prerequisite for
this is that it is located in the vehicle, that the
Bluetooth function is
activated and the connection identification to the HFCK is not deleted.