Bissell PROHEAT2X 20B4 - Manual (Page 16)

w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
O
perations
16
Hard floor cleaning
Your ProHeat 2X model may have
come with a hard floor attachment
and 2X Hard Floor Solutions Formula.
If not, these products are available
for purchase by contacting the BISSELL
Consumer Services department by
phone or at the website. The hard floor
tool provides effective cleaning for lino-
leum, vinyl, and tile floors. Caution: Do
not use on unsealed hardwood floors.
1. Vacuum or sweep thoroughly to pick up
any loose debris and pet hair.
2. move any furniture, if needed.
3. fill the formula tank to "WAteR" line
with water. fill to "fORmulA" line with
biSSell 2X Hard floor Solutions.
4. fill the 2-in-1 water tank with hot tap
water and set aside.
5. Attach the hard floor tool onto the bot-
tom of the machine by hooking it into
the nozzle and swinging it down until it
clicks into place.
6. Set Readytools dial to the "flOOR
cleAniing" setting.
7. Set the custom clean dial to normal clean.
8. Plug into an outlet and turn the power
switch and heater ON ( I ).
9. Slowly move the machine forward and
back over hard floor surface one time
while depressing trigger.
Caution: Do not overwet.
10. Repeat the motion without pressing the
trigger using the hard floor tool to squee-
gee and suction up the dirty water.
11. Allow adequate time for floors to dry.
12. Remove hard floor tool, rinse and dry
before storing.
13. Rinse out the formula tank.
WARNING:
to reduce the risk of fire, elec-
tric shock or injury unplug from
outlet before servicing.
WARNING:
to reduce the risk of fire
and electric shock- when clean-
ing a hard floor, the biSSell hard
floor tool 203-5642 must be used
and it must only be used with
biSSell Hard floor Solutions or
biSSell 2X Hard floor Solutions
cleaning fluid intended for use with
this appliance.
5.