1 introduction, 2 operating specifications, Introduction -1 – JLG M450 Operator Manual User Manual
Page 81: Operating specifications -1
SECTION 6 - GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
3121647
– JLG Lift –
6-1
SECTION 6. GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
6.1
INTRODUCTION
This section of the manual provides additional necessary infor-
mation to the operator for proper operation and maintenance of
this machine.
The maintenance portion of this section is intended as informa-
tion to assist the machine operator to perform daily maintenance
tasks only, and does not replace the more thorough Preventive
Maintenance and Inspection Schedule included in the Service
and Maintenance Manual.
Other Publications Available:
Service and Maintenance Manual ............................................3121648
Illustrated Parts Manual ................................................................3121649
6.2
OPERATING SPECIFICATIONS
Table 6-1. Operating Specifications
Maximum Work Load (Capacity)
ANSI Markets
Unrestricted:
500 lb. (227 kg)
Maximum Work Load (Capacity)
CE & Australia Markets
Unrestricted:
500 lb. (230 kg)
Travel Speed
3.2 mph (5.2 kph)
Maximum Travel Grade (Gradeablility
30%
Maximum Travel Grade (Side Slope)
5°
Maximum Height: (stowed)
E450A
E450AJ/M450AJ
6 ft. 6.25 in. (1.9 m)
6 ft. 7 in. (2.0 m)
Maximum Horizontal Platform Reach
E450A
E450AJ/M450AJ
23 ft. 1in.(7.0 m)
23 ft. 9 in. (7.24 m)
Turning Radius (Curb to Curb)
15 ft. 3 in. (4.65 m)
Turning Radius (inside)
2 ft. (0.61 m)