Brookstone Air Cleaner - Manual (Page 14)

13
UsInG The DRYInG MoDe fUncTIon
iMPOrtAnt: the Drying Mode function should only be used to remove
possible minor residual moisture. DO nOt use the Drying Mode to dry
a soaking wet Filter, as this may damage the unit.
1 . With the unit off and a clean FILTER in the unit, press and hold the FAN
SPEED and TIMER buttons for 3 seconds . The unit will run the Fans on the
Turbo setting with no electrical charge for 40 minutes . The Turbo Fan Speed
LED will blink during the Drying Mode .
2 . After 40 minutes have passed, the unit will exit out of the Drying Mode and
will turn off .
note: to exit out of the Drying Mode before 40 minutes have passed,
press the POWer button. the Drying Mode will be stopped and the
unit will turn off.