JLG 24RS Operator Manual - Manual (Page 73)

SECTION 6 - GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
3121286 – JLG Lift – 6-1
SECTION 6. GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
6.1 INTRODUCTION
This section of the manual provides additional necessary
information to the operator for proper operation and mainte-
nance of this machine.
The maintenance portion of this section is intended as infor-
mation to assist the machine operator to perform daily main-
tenance tasks only, and does not replace the more thorough
Preventive Maintenance and Inspection Schedule included
in the Service and Maintenance Manual.
Other Publications Available:
Service and Maintenance Manual ............................ 3121287
Illustrated Parts Manual ............................................ 3121288
6.2 OPERATING SPECIFICATIONS AND
PERFORMANCE DATA
Operating Specifications
Table 6-1. Operating Specifications
Capacity: Unrestricted:
ANSI
ANSI Export
500 lbs. (227 kg)
500 lbs. (227 kg)
Maximum Travel Grade, stowed
Position (Gradeability) see Figure 4-3. 45%
Maximum Travel Grade, stowed
Position (Side Slope) see Figure 4-3. 5°
Drive Speed - Stowed 2.8 mph (4.5 kph)
Elevated Drive Speed 0.75 mph (1.2 kph)
Gross Machine Weight - Approximate 23300 lbs. (10568 kg)
Ground Bearing Pressure 83 psi (5.83 kg/cm 2 )
System Voltage 12V DC
Maximum Main Relief Hyd. Pressure 3000 psi (207 Bar)