BT Freestyle 250 - Manual (Page 48)

Answer & Record
This invites your caller to leave a message.
The pre-recorded message is, “Hello, your call cannot be taken
at the moment, so please leave your message after the tone”.
Answer Only
This does not allow your caller to leave a message.
The pre-recorded message is, “Hello, your call cannot be taken
at the moment, and you cannot leave a message, so please call
later”.
Record your own outgoing message
An Answer & Record message can be up to 2 minutes long.
An Answer Only message can be any length depending on
the amount of recording memory available.
1. Press scroll to
Ans. machine
menu and press .
2. Scroll or to
Ans. settings
and press .
3.
**Listen**
will be displayed and you will be prompted to
enter to hear the menu options.
4. Press to start to record your new message. Press to end
recording and your new message will be played back to you.
5. Press and hold to return to standby.
Clr
1
Menu
Menu Menu
48 Answering machine
BT Freestyle 250 – Issue 02 Ed 1 – 02.01.07 – 7971
If you experience any problems, please call the Helpline on 0870 240 3962 or email [email protected]
To set your answering machine to
Answer & Record or Answer Only,
see Set answer mode, page 50 .
To record a new Answer Only message
you must first set up your answering
machine to Answer Only, see page 50.
Similarly, to record a new
Answer & Record message the
answering machine must be set to
Answer & Record.