JLG 15/20MSP Parts Manual - Manual (Page 19)

3121232 15MVL 15MSP 20MVL 20MSP 1-13
SECTION 1 BASE
FIGURE 1-4. COVERS INSTALLATION
ITEM # PART NUMBER QTY. DESCRIPTION REV.
Ref COVER INSTALLATIONS
0274891 Ref FIXED STANDARD C
1001093808 Ref FIXED STANDARD (4-6Volt AGM Batteries) B
0274889 Ref HINGED C
0274890 Ref HINGED LOCKABLE C
Ref Note: Replacement Decals Must be Ordered Separately - See
Section 8.
1 0120006 2 Adjuster, Hood (All Models excepted Fixed Standard 4-6Volt
AGM Batteries Installation)
2 0641405 AR Bolt 1/4in-20NC x 5/8in
3 0641614 2 Bolt 1/4in-20NC x 1-3/4in
4 0902836 AR Bracket, Hood Support Options:
4 Fixed Cover
2 Hinged Cover
5 1671283 2 Cover, Counterweight
6 1 Cover, Left Options:
1671289 Fixed
1671284 Hinged
1671287 Hinged Lockable
6A Not Available 1 Latch
2940142 1 Keeper, Latch
6B 2600258 2 Hinge
7 1 Cover, Right Options:
1671290 Fixed
1671285 Hinged
1671288 Hinged Lockable
7A Not Available 1 Latch
2940142 1 Keeper, Latch
7B 2600258 2 Hinge
8 1 Cover, Ground Station Options:
1671291 Fixed
1671286 Hinged & Hinged Lockable
9 1 Cover, Charger Options:
1671256 Cover without Beacon Light
2915256 Cover with Beacon Light Kit
Ref Note: For Machines Built Prior to SN 0130009136,
original beacon light mounting holes have changed.
Use P/N 2915256 Cover/Beacon Light Kit as replacement.
Kit may also be used on Machines Built SN 0130009136
to Present.
10 Not Used
11 3311405 4 Locknut 1/4in-20NC
12 3311605 2 Locknut 3/8in-16NC
13 3900258 AR Button Head Screw 1/4in-20NC x 3/4in (Fixed Cover Only)
14 4711600 2 Flatwasher 3/8in Narrow
15 4751400 28 Flatwasher 1/4in Wide
16 4761400 8 Lockwasher 1/4in (Hinged Covers Only)
17 0811408 2 Screw 1/4in-20NC x 1in