JLG 600SC_660SJC Operator Manual - Manual (Page 61)

SECTION 4 - MACHINE OPERATION
3121156 – JLG Lift – 4-7
7. Prior to stopping the machine, position switches as fol-
lows:
a. Position DRIVE SPEED/TORQUE SELECT switch to
LOW. (Backward Position)
8. For traveling up grades, position switches as follows:
a. Position DRIVE SPEED/TORQUE SELECT switch to
HIGH. (Backward position)
NOTE: For smoother operation when driving with fully extended
boom, place DRIVE control to SLOW before stopping.
This machine is equipped with a Drive Orientation Indicator.
The yellow light on the platform control console indicates
that the boom is swung beyond the rear and the machine
may Drive/Steer in the opposite direction from the movement
of the controls. If the indicator is illuminated, operate the
Drive function in the following manner:
1. Match the black and white direction arrows on both plat-
form control panel and the chassis to determine the
direction the machine will travel.
2. Push and release the Drive Orientation Override switch.
Within 3 seconds, slowly move the Drive control toward
the arrow matching the intended direction of machine
travel. The indicator light will flash during the 3 second
interval until the drive function is selected.