Disney Interactive Studios Pure - Manual (Page 3)

Electronic Template: BOOKLET - PS3 Cover Ver. 4.0
Doc: A0229.01
FLAT: 9.25" x 5.781"
FINISHED: 4.625" x 0.0" x 5.781"
2/07
File name: TPBOOKLETPS3cover108.eps
Rev 1/4/08
1/8" BLEED ZONE
1/16" SAFETY ZONE
PRINT/TEXT ZONES Third Party templates are located at
https://www.sceapubsupport.com
5.781"
4.625" 4.625"
9.25"
DIS
client
[email protected]
tel 626.584.4070 x510 061
job#
Mike Yamato
Account Executive
Electronic Template: BOOKLET - PS3 Cover Ver. 4.0
Doc: A0229.01
FLAT: 9.25" x 5.781"
FINISHED: 4.625" x 0.0" x 5.781"
2/07
File name: TPBOOKLETPS3cover108.eps
Rev 1/4/08
1/8" BLEED ZONE
1/16" SAFETY ZONE
PRINT/TEXT ZONES Third Party templates are located at
https://www.sceapubsupport.com
5.781"
4.625" 4.625"
9.25"
DIS
client
061
job#
PURE
project title
PS3mnl
component
070308
date
1
round
SELECT button
USB connector
L2 button
L1 button
Directional
buttons
Left stick/
L3 button*
START button
R2 button
R1 button
button
button
button
button
Right stick/
R3 button*
PS button
Port indicators
GETTING STARTED
Saved data for PLAYSTATION ® 3 format software
Saved data for PLAYSTATION ® 3 format software is saved on the system’s hard disk.
The data is displayed under “Saved Game Utility” in the Game menu.
Game Hint: Set Motion Sensor Adjust to “on” to enable the motion sensitive feature of the
wireless controller. Roll the wireless controller from side to side or pitch forwards and
backwards to maneuver your vehicle in the air. When on the ground, pitch the controller up
when leaving a jump to preload. The amount of in-air control or preload you get will depend on
the degree of controller movement applied.
Note: To use the controller, you must first register or “pair” the controller with the
PLAYSTATION ® 3 system and assign a number to the controller. For details, refer to the
instructions supplied with the system.
Using the SIXAXIS™ wireless controller (for PLAYSTATION ® 3)
* The L3 and R3 buttons function when the sticks are pressed.
PLAYSTATION ® 3 system front
GETTING STARTED
To remove a disc, touch the eject button after quitting the game. Hint
Note: Some models of the PLAYSTATION ® 3 system do not include media slots. For specific
features included, refer to the instructions for use of your model of the PLAYSTATION ® 3 system.
Starting a game: Before use, carefully read the instructions supplied with the PLAYSTATION ® 3
computer entertainment system. The documentation contains information on setting up and
using your system as well as important safety information.
Check that the MAIN POWER switch (located on the system rear) is turned on. Insert the PURE
disc with the label facing up into the disc slot. Select the icon for the software title under [Game]
in the PLAYSTATION ® 3 system’s home menu, and then press the button. Refer to this manual
for information on using the software.
Quitting a game: During gameplay, press and hold down the PS button on the wireless
controller for at least 2 seconds. Then select “Quit Game” from the screen that is displayed.
Insert the disc with the
label side facing up.
CF SD/miniSD
Disc slot
CF* 1 slot
* 1 CompactFlash ®
* 2 Secure Digital
SD* 2 Memory
Card slot
Memory
Stick™ slot
Slot cover
Power button
Vent
USB connectors
HDD access indicator
WLAN access indicator
Eject button
Eject button
3
PURE_PS3mnl.ITmf.indd 6-7 7/28/08 8:14:59 PM