JLG 3246ES Parts Manual - Manual (Page 75)

3121275 1930ES, 2030ES, 2630ES, 2646ES & 3246ES 4-7
SECTION 4 PLATFORM
FIGURE 4-2. RAIL (FIXED) INSTALLATION - 1930ES
ITEM # PART NUMBER QTY. DESCRIPTION REV.
Ref RAIL INSTALLATION - 1930ES
0274985 Ref Rails with Gate Closure D
0274816 Ref Rails with Chain Closure D
1 0630565 12 Bolt, Carriage M10 x 55mm
2 to 3 Not Used
4 1 Rail Assembly Options (See Items 301-322 for Breakdown):
2902448 Rails with Gate Closure
2902496 Rails with Chain Closure
5 Not Used
6 3290606 4 Capnut M6
7 3291005 12 Locknut M10
8 3841716 2 Rod, Fiberglass
9 4010616 2 Screw M6 x 40mm
10 4010618 2 Screw M6 x 50mm
11 4812000 12 Flatwasher M10
12 0700823 4 Screw M8 x 75mm
13 3290806 4 Capnut M8
14 4811900 4 Flatwasher M8
15 3520072 2 Cap-Plug
0274985 Ref GATE CLOSURE COMPONENTS D
Ref Note: For Australian Spec Machines with magnetic gate
latch, see SPECIAL OPTIONS SECTION.
101 Not Used
102 2080040 8 Fastener, Huck
103 2600281 2 Hinge
104 Not Used
105 3080007 1 Magnet, Gate
0274816 Ref CHAIN CLOSURE COMPONENTS D
201 Not Used
202 1260136 1.75ft/53cm Chain (was 2ft/61cm)
203 2820097 1.67ft/51cm Cover, Chain (was 2ft/61cm)
204 Not Used
205 1001101076 1 Snap Latch Repair Kit (was p/n 2940064) (Includes Item 206)
206 3010088 2 Link
Ref RAIL ASSEMBLY - 1930ES
2902496 Ref Rails with Gate Closure L
2902448 Ref Rails with Chain Closure J
301 Not Used
302 1271617 1 Rail, Slide (Left)
303 1271618 1 Rail, Slide (Right)
304 3576645 1 Plate, Billboard (Upper)
305 3574184 1 Plate, Billboard (Lower)