Belkin 2 PORT KVM SWITCH F1DK02U - Manual (Page 9)

Step-by-Step Installation Guide
This section provides complete instructions for the hardware setup of a
single Switch.
Connecting Computers to the Switch
1. Make sure the computer is powered on.
2. Verify that your USB keyboard and mouse work properly with your computer
before you install the Switch.
3. Using the attached cables, take
the VGA cable and connect it to
the VGA port on the first
computer.
4. Connect the USB keyboard KVM
cable to the keyboard port on
the computer.
5. Repeat steps 1 through 4
for the additional computer
to be connected to
the Switch.
7
INSTALLATION INSTALLATION
P74463-F1DK102U-man.qxd 11/21/03 4:46 PM Page 7