Blaupunkt BUENOS AIRES 200 7 649 020 110 - Manual (Page 33)

33
EN
GLISH
Additional functions
External audio sources
Connecting external audio sources
You can connect external audio sources, such as
portable CD players, MiniDisc players, MP3 play-
ers, via the FRONT-AUX-IN socket
8 (AUX input)
and play them back in AUX mode via the loud-
speakers of the car sound system.
Changing to AUX mode
Press the On/Off button
4 repeatedly until
"AUX" appears.
Notes:
You can switch off the AUX input if no other
external audio source is connected (see
the chapter "User settings", section "Per-
forming settings in the user menu", menu
item "AUX").
You can select a different name for the AUX
input than "AUX" (see the chapter "User
settings", section "Performing settings in
the user menu", menu item "NAME SET").
Restoring factory settings
Press the reset button
: with a pointed ob-
ject (e.g. a pin or the tip of a ball-point pen).
Factory settings in the user menu:
SYNC ON AF ON
DIM OFF REG ON
SWPRE R ATPS ON
SPRM ON MONO OFF
NEWS OFF SCL OFF
LO.S OFF AUX ON1
DEMO OFF CD READ 1
u
•
•
u
Technical data
Amplifi er
Output power:
4 x 30 watts sine in
accordance with
DIN 45324 at 14.4 V
at 4 ohms.
4 x 50 watts max.
power
Tuner
Wavebands (Europe):
FM: 87.5 - 108 MHz
MW: 531 - 1,611 kHz
LW: 153 - 281 kHz
FM frequency response:
30 - 15,000 Hz
CD
Frequency response:
20 - 20,000 Hz
Pre-amp out (Buenos Aires 200 only)
2 channels:
2 V
Input sensitivity
AUX input:
1.2 V / 10 kΩ
Dimensions and weight
W x H x D (mm):
182 x 53 x 155
Weight: approx. 1.30 kg
Subject to changes
Additional functions Technical data
02_BuenAir200_Stock100_gb.indd 33 02_BuenAir200_Stock100_gb.indd 33 03.12.2008 13:18:02 Uhr 03.12.2008 13:18:02 Uhr