JLG E300 ANSI Parts Manual User Manual
Page 178

7-14
SECTION 7 ELECTRICAL
811
See Note
1
Boom Limit Switches Harness (Note: Not Available for
Purchase)
811A
AR
Cable Options (Upper Limit Switch):
1060341
20ft/6m
Prior to SN 0300063766 (Bulk Length)
1060881
1
SN 0300063766 to SN 0300138358 (Cut to Required Length)
811B
AR
Cable (Lower Limit Switch) Options:
1060341
17.5ft/5.4m
Prior to SN 0300063766 (Bulk Length)
1060880
1
Prior to SN 0300063766 (Cut to Required Length of 17.5ft/5.4m
-
Less Limit Switch & Strain Relief Connector - See Section 3 for
Limit Switch p/n)
1060341
6.5ft/2m
SN 0300063766 to SN 0300138358 (Bulk Length -Less Limit
Switch & Strain Relief Connector - See Section 3 for Limit
Switch p/n)
4922598
1
SN 0300063766 to SN 0300138358 (Cut to Required Length of
6.5ft/2m
-
Includes
Limit Switch & Strain Relief Connector)
812
See Note
1
Controller Harness/Circuit Board Assembly (Drive and Steer)
(Note: Not Available for Purchase)
812A
4460265
1
Plug, Male - 9 Position
4460226
7
Socket, Female
813
See Note
1
Controller Harness Assembly (Lift and Swing)
(Note: Not Available for Purchase)
813A
4460265
1
Plug, Male - 9 Position
4460226
8
Socket, Female
814
See Note
1
Controller Harness Assembly (Speed) (Note: Not Available for
Purchase)
814A
4460225
1
Plug, Male - 6 Position
4460226
4
Socket, Female
815
4922294
1
Jib Harness (E300AJ Only)
1/A
815A
4460225
1
Plug, Male - 6 Position
4460227
3
Pin, Male
815B
4460418
1
Connector, Female
4460419
3
Terminal
Ref
OPTIONAL HARNESS COMPONENTS
901
AC to Platform Receptacle Components Options
0258303
Ref
110V GFI Receptacle
6/D
0258305
Ref
220V GFI Receptacle
4/D
0271449
110V/220V(When Plug & Receptacle Supplied Locally)
1
901A
1
Box, Switch Options:
0860038
0258303 & 0258305 Installations
See Note
0271449 Installation (Note: Not Available - Purchase
Locally)
901B
1
Receptacle Options:
4460346
0258303 Installation (110V GFI)
4460125
0258305 Installation (220V GFI)
See Note
0271449 Installation (Note: Not Available - Purchase
Locally)
FIGURE 7-2. HARNESS COMPONENTS INSTALLATION (CONTINUED)
ITEM #
PART NUMBER
QTY.
DESCRIPTION
REV.