JLG 500RTS Operator Manual - Manual (Page 26)

SECTION 3 - USER RESPONSIBILITIES AND MACHINE CONTROL
3-2 – JLG Lift – 3120828
Placards
Important points to remember during operation are pro-
vided at the control stations by DANGER, WARNING,
CAUTION, IMPORTANT and INSTRUCTION placards. This
information is placed at various locations for the express
purpose of alerting personnel of potential hazards consti-
tuted by the operating characteristics and load limitations
of the machine. See foreword for definitions of the above
placards.
Capacities
Raising platform above stowed position with or without
any load in platform, is based on the following criteria:
1. Machine is positioned on a smooth, firm and level
surface.
2. Load is within manufacturer’s rated capacity.
3. All machine systems are functioning properly.
4. Leveling Jacks properly set (If Equipped).
Stability
This machine, as originally manufactured by JLG and
operated within its rated capacity on a smooth, firm and
level supporting surface, provides a stable aerial platform
for all platform positions.
3.4 CONTROLS AND INDICATORS
Ground Control Station
DO NOT OPERATE FROM GROUND CONTROL STATION WITH
PERSONNEL IN THE PLATFORM EXCEPT IN AN EMERGENCY.
PERFORM AS MANY PRE-OPERATIONAL CHECKS AND INSPEC-
TIONS FROM THE GROUND CONTROL STATION AS POSSIBLE.
Platform/Ground
Control Switch
Fuel Select
Switch
Voltmeter
Emergency Stop
Switch
Engine Start
Button
Platform Extension
Select
Lift Switch
Hourmeter
Water
Temperature
Engine Oil
Temperature
15 Amp Breaker
(Diesel Only)
Platform Extension
Switch
Figure 3-1. Ground Control Station