JLG 266 Parts Manual - Manual (Page 199)

HYDRAULIC CIRCUITS
3126025 266, 307, 266 LoPro, 26.6, 30.7, 26.6 LP 8-25
Figure 8-8 Tilt & Tilt Compensating Cylinder
Item Part Number Qty. Description Rev.
51 2142733 2 CONNECTOR
105 Ref MAIN CONTROL VALVE, (see Figure 9-6 for details)
123 2142216 2 SWIVEL NUT RUN TEE
124 2143017 2 ELBOW, 90 DEGREES
126 2754306 2 HOSE ASSY
201 0700815 5 HEX HD CAPSCREW, 8-1.25X35mm
202 0700818 1 HEX HD CAPSCREW, 8-1.25X50mm
218 0874960 5 COVER PLATE
219 1309435 1 COVER PLATE
220 1317515 1 CLAMP
221 1321128 7 CLAMP
222 1321133 2 STACKING BOLT
223 1321134 2 LOCKING PLATE
224 Ref TILT CYLINDER, (see Figure 9-3 for details)
226 2140118 6 DUAL NUT
227 2141621 4 CONNECTOR
228 2143017 2 ELBOW, 90 DEGREES
233 2754113 2 HOSE ASSY
234 2754122 1 HOSE ASSY
251 4569029 1 TUBE ASSY
252 4569042 1 TUBE ASSY
253 4569047 1 TUBE ASSY
254 4569053 1 TUBE ASSY
312 Ref COMPENSATION CYLINDER, (see Figure 9-4 for details)
408 1001101935 2 ELBOW, 45 DEGREES, (AUS - if equipped with LMIS)
415 1001101807 2 ADAPTER, (AUS - if equipped with LMIS)
418 1001101954 2 PRESSURE SENSOR, (AUS - if equipped with LMIS)
NOTE: ITEM NUMBERS NOT LISTED ARE NOT USED ON THIS FIGURE