JLG 4017 Platform Operator Manual - Manual (Page 20)

Section 2 - Pre-Operation and Controls
2-2 31200029
Begin your platform walk-around inspection at item 1, as noted below. Continue to
your right (counterclockwise when viewed from top) checking each item in
sequence.
INSPECTION NOTE: On all components, make sure there are no loose or missing
parts, that they are securely fastened and no visible leaks or excessive wear exists
in addition to any other criteria mentioned. Inspect all structural members including
attachment and railing for cracks, excessive corrosion and other damage.
1. Platform -
• Properly installed, see “Platform Installation” on page 4-3.
• Rail connections properly secure, undamaged and no missing hardware.
• Applicable Operator & Safety manual located in manual holder.
2. Platform Gate - Clean, undamaged and closes properly.
3. Footswitch - Clean, undamaged and work properly; not modified, disabled or
blocked.
4. Control Console - Clean, undamaged; controls return to normal and control
markings are legible.
5. Rotate Coupler - Undamaged, bolts tight; hydraulic hoses undamaged, not
leaking.
OZ1660
1 2
4
5
3