Broan 4-Way Convertible Range Hood QL1 Series User Manual
Ql1 series 4-way convertible range hood, Specification sheet

SPECIFICATION SHEET
70F
99044082A
SPECIFICATIONS
VOLTS
AMPS
CFM
SONES
DUCT
HIGH NORMAL
HIGH NORMAL
120
1.9
190
100
6.0
2.0
3¼" X 10" (H)
120
1.9
190
130
6.0
2.0
3¼" X 10" (V)
120
1.9
230
150
6.0
2.0
7" Round (V)
120
1.9
--
--
--
--
Non-Ducted
QL1 SERIES
4-WAY
CONVERTIBLE
RANGE HOOD
HVI-2100 ceRtIFIeD RAtINgs comply with new testing
technologies and procedures prescribed by the Home
Ventilating Institute, for off-the-shelf products, as they are
available to consumers. Product performance is rated at 0.1 in.
static pressure, based on tests conducted in a state-of-the-art
test laboratory. sones are a measure of humanly-perceived
loudness, based on laboratory measurements.
Deluxe features in our smaller shell - offers the
most hood for the money.
FEATURES
•
2-speed fan control
•
Polymeric blade and light lens (accepts two 60W bulbs)
•
Washable aluminum filter
•
converts to non-ducted by removing cover plate from
control panel and installing the non-ducted filter BPQTF
(purchase separately)
•
3¼" x 10" damper/duct connector included
•
7" round duct adapter plate included
•
Mitered sides and hemmed bottom for safety,
cleanability and good looks
•
Contemporary styling in White and Biscuit
•
Available in 30" width only
Broan-NuTone LLC Hartford, Wisconsin www.broan.com 800-558-1711
REFERENCE
QTY.
REMARKS
Project
Location
Architect
Engineer
Contractor
Submitted by
Date
TYPICAL SPECIFICATION
Range	hood	shall	be	Broan	QL1	Series.
Unit	shall	be	convertible	between	ducted	(using	a	washable	
aluminum filter) and non-ducted (using non-ducted filter
BPQTF).
Motor	to	be	permanently	lubricated.
Unit	shall	have	a	2-speed	fan	control	with	separate	2-level	
light	switch.
sides	shall	be	mitered	and	bottom	edge	hemmed	with	no	
sharp	edges.
Air	delivery	shall	be	no	less	and	sound	levels	no	greater	than	
shown.	All	air	and	sound	ratings	shall	be	certified	by	HVI.
Unit	shall	be	U.L.	listed.
